loading spinner

4-Cyl. replacement wire-harness

New product

4-Cyl. replacement wire-harness for ETHANOL FLEX E85® Conversion Kits.
All types of connectors are available : Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.

More details

55,41€

Are you planning to change your car ? The connectors are different on your new car and you can't plug your Ethanol E85 conversion kit ?

No problem ! Now, with the replacement wire-harness, you can use the kit on your new car.

There are 6 types of connectors: Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
Please specify the type of connectors when ordering.

Write a review

4-Cyl. replacement wire-harness

4-Cyl. replacement wire-harness

4-Cyl. replacement wire-harness for ETHANOL FLEX E85® Conversion Kits.
All types of connectors are available : Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.

Artline International SARL (EcoFuelBox) is a manufacturer of E85 ethanol conversion kits, based in Lyon.
stesting_SMALL.jpg We design, manufacture and distribute E85 ethanol conversion kits under brands: EcoFuelBox™ and Ethanol Flex E85™ since 2008. High quality of our products is one of the most important thing for us and our customers.

That is why, we only use premium quality automotive-specific AEC-Q100 compliant components, from the world's most reputable brands, such as: TDK, Murata, Panasonic, Infineon, Toshiba, STMicroelectronics, Bourns...
In accordance with CE regulations on automotive equipment and in accordance with the requirements of ISO 9001, each E85 bio ethanol kit (circuit board, components, firmware, wiring harness, connectors, sensors...) passes the multiple quality control stages on the different stages of production, assembly and firmware programming.

After assembly, each kits is tested and configured on a test bench to ensure that it work perfectly.

If you need technical assistance or simply want more information about the installation or use of our E85 bio ethanol kits,
the members of our Customer Service team are at your disposal.
You can reach us by phone, Monday to Friday from 9:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m., at the following numbers:
04 28 29 82 61 or 09 74 98 42 44

COMMENT FAIRE POUR PASSER UNE COMMANDE ?

There are 6 types of injector connectors: Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
The type of connector may vary, depending on the make, model and  manufacture date of the car.

To order a kit, all you have to do is select the right type of connectors before adding the product to the basket.

If you don't know what type of connectors is used on your car, just select "Unknown" from the connector list.
In this case, please send us a message (on the order confirmation page) specifying the following information about your vehicle:

  • Make and model of your (e.g .: PEUGEOT 406 2.0L)
  • The date of first registration (ex .: 20/09/2003)
  • VIN Number (ex .: WBAWD71017P073673)
  • The odometer reading (e.g .: 98,500 km)

We will check our databases for the type of connector you will need and send you the kit fitted with the right type of connectors.

This information is important for processing your order as quickly as possible.

IMPORTANT!
Please make sure that the parts responsible for fuel injection, ignition, cranking and managing the air / fuel mixture (spark plugs, ignition coils, filters, lambda probe, coolant temperature probe. ..) and which must be regularly replaced , were replaced within the time limits suggested by the manufacturer (according to the maintenance book).
Any of these parts, if it is faulty / degraded (which is rarely detected by the OBD2 system), can cause the malfunction of the car while running on ethanol E85 with the conversion kit.

You can reach us by phone, Monday to Friday from 9 a.m. to 12 p.m. (9h00 - 12h00) and from 1 p.m. to 5 p.m.,(17h00 - 17h00) at the following numbers:

04 28 29 82 61 or 09 74 98 42 44   Or my email trough our Contact Form

Customers who bought this product also bought: