No products
PRO+ Series 8 Cyl-Ethanol E85 Kits
New product
PRO+ Series Fully Automatic Digital 8-Cylinders E85 Ethanol Conversion Kit with Fuel Sensor & Cold Start Assist. (Flex Fuel, Bioethanol)
ETHANOL FLEX E85® Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 50% of your fuel budget on every tank fill.
Made in France. CE, RoHs.
PRO+ Series 8 cylinders - Fully Automatic Digital E85 Ethanol Conversion Kit with Cold Start Assist. (Flex Fuel kit, Kit e85, Bioethanol)
This new model is equipped with a more powerful microcontroller, an additional external temperature sensor and a fuel sensor * (depending on the model)
ETHANOL FLEX E85® Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 50% of your fuel budget on every tank fill.
Easy to install and compatible with 95% of gasoline vehicles with electronic fuel injection and oxygen sensor manufactured after 1990.
After installation vehicle will become a Flex Fuel vehicle.
Not compatible with : Direct Injection / Mechanical Injection / Carburetors
1. Made in FRANCE.
2. Covered by 2-years Limited Warranty.
3. CE approved and complies with European directives: EMC 2004/108/EC, EN61000-6-1: 2007, EN61000-6-3: 2007
5. Reduces driver's fuel budget. 50% Less on each fuel tank refill with E85. (depends of local fuel prices)
6. 100% automatic, so car can run either on Ethanol E85 or SP95/SP98 or mix of those fuels.
7. Build in cold-start assist system for easy start at cold temperatures.
8. Takes less than 45 minutes to install. There is no wires to cut or solder.
All types of connectors are available : Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
Package content:
1 x E85 Ethanol Conversion Kit.
1 x Temperature sensor.
1 x Fuel sensor.
1 x Fuel hose 50cm.
2 x Quick release connectors for hoses.
4 x Fuel hose clamps.
1 x Polarity tester.
10 x Nylon cable tie.
1 x User Manual (French / English)
Excellent et intelligent.
Boitier super qualitatif.
L'ensemble est très bien conçu avec des connectiques de qualité (ici Bosch EV6).
L'installation est simple -enfin sur ce V8 Volvo/Yamaha c'est un vrai travail - et le boîtier est malin, très bien pensé.
Comme déjà dit, tout est qualitatif.
Le moteur tourne comme une horloge.
Et du fait d'un souci du au véhicule j'ai expérimenté le SAV.
Un peu long à joindre certains jours (merci Alex pour le n° direct) mais des conseils et un bilan ultra pro.
Je ne peux que me féliciter des mes achats chez Artline.
J'adore quand une PME évolue avec intelligence et avec des passionnés aux commandes.
MERCI à l'équipe et un clin d'œil à Alex.
- 1 out of 1 people found this review useful.
produit 100% Français
produit conforme a la description service tchat réactif et bon conseille a répondu a mes questions avant achat, et finalement opté pour ce modèle et monté sans rencontrer de problème sur cadillac seville 2000 v8 4.6L fonctionne parfaitement manuel d'installation et réglage boitier clair ravis de mon achat
- 12 out of 14 people found this review useful.
Runs well on my Ford Mustang 5.0 V8
I installed the EcoFuelBox Pro+ kit on my Ford Mustang 5.0 V8 in December 2021 and am very pleased with the results. Installation took me almost an hour. The engine runs great with aproximatevely 5% of gain in power (because of the E85). Here in Sweden winters are quite cold, but I haven't experienced cold start issues with this kit. After-sales team was very kind and professional and helped me a lot during the installation process.
- 5 out of 11 people found this review useful.
Produit Français ! Service après-vente réactif.
Installé sur Dodge RAM 1500 V8 5.7L. C'est le 2ème kit que j'achète. Le premier kit (4 cyl.) a été installé sur Ford Focus de 2009 et fonctionne comme une horloge. Service après-vente réactif. J'avais besoin de conseils pour installer le kit et Alex du support technique m'a aidé par téléphone pour me dépanner par rapport au problème que j'avais.
- 10 out of 10 people found this review useful.
Artline International SARL (EcoFuelBox) is a manufacturer of E85 ethanol conversion kits, based in Lyon.
We design, manufacture and distribute E85 ethanol conversion kits under brands: EcoFuelBox™ and Ethanol Flex E85™ since 2008. High quality of our products is one of the most important thing for us and our customers.
That is why, we only use premium quality automotive-specific AEC-Q100 compliant components, from the world's most reputable brands, such as: TDK, Murata, Panasonic, Infineon, Toshiba, STMicroelectronics, Bourns...
In accordance with CE regulations on automotive equipment and in accordance with the requirements of ISO 9001, each E85 bio ethanol kit (circuit board, components, firmware, wiring harness, connectors, sensors...) passes the multiple quality control stages on the different stages of production, assembly and firmware programming.
After assembly, each kits is tested and configured on a test bench to ensure that it work perfectly.
If you need technical assistance or simply want more information about the installation or use of our E85 bio ethanol kits,
the members of our Customer Service team are at your disposal.
You can reach us by phone, Monday to Friday from 9:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m., at the following numbers:
04 28 29 82 61 or 09 74 98 42 44
Ethanol Flex E85 kit could be easily installed in less than 30 minutes.
Without mechanical modification of the vehicle. There is no wires to cut or solder.
You just need to plug the kit's connectors to your vehicle wireharness and injectors, that's all.
Just follow the installation procedure described in the installation guide included in the kit. After installation, your vehicle can run on E85 bioethanol, Super 95/98 or a mixture of these fuels.
The kit can be removed without leaving any trace.
COMMENT FAIRE POUR PASSER UNE COMMANDE ?
There are 6 types of injector connectors: Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
The type of connector may vary, depending on the make, model and manufacture date of the car.
To order a kit, all you have to do is select the right type of connectors before adding the product to the basket.
If you don't know what type of connectors is used on your car, just select "Unknown" from the connector list.
In this case, please send us a message (on the order confirmation page) specifying the following information about your vehicle:
- Make and model of your (e.g .: PEUGEOT 406 2.0L)
- The date of first registration (ex .: 20/09/2003)
- VIN Number (ex .: WBAWD71017P073673)
- The odometer reading (e.g .: 98,500 km)
We will check our databases for the type of connector you will need and send you the kit fitted with the right type of connectors.
IMPORTANT!
Please make sure that the parts responsible for fuel injection, ignition, cranking and managing the air / fuel mixture (spark plugs, ignition coils, filters, lambda probe, coolant temperature probe. ..) and which must be regularly replaced , were replaced within the time limits suggested by the manufacturer (according to the maintenance book).
Any of these parts, if it is faulty / degraded (which is rarely detected by the OBD2 system), can cause the malfunction of the car while running on ethanol E85 with the conversion kit.
You can reach us by phone, Monday to Friday from 9 a.m. to 12 p.m. (9h00 - 12h00) and from 1 p.m. to 5 p.m.,(17h00 - 17h00) at the following numbers:
04 28 29 82 61 or 09 74 98 42 44 Or my email trough our Contact FormCustomers who bought this product also bought:
PRO+ Series 4 Cyl-Ethanol E85 Kits
Review(s): 34PRO+ Series Fully Automatic Digital 4-Cylinders E85 Ethanol Conversion Kit...