No products
New product
PRO+ Series Fully Automatic Digital 6-Cylinders E85 Ethanol Conversion Kit with Fuel Sensor & Cold Start Assist. (Flex Fuel, Bioethanol)
ETHANOL FLEX E85® Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 50% of your fuel budget on every tank fill.
Made in France. CE, RoHs.
PRO+ Series 6 cylinders - Fully Automatic Digital E85 Ethanol Conversion Kit with Cold Start Assist. (Flex Fuel kit, Kit e85, Bioethanol)
This new model is equipped with a more powerful microcontroller, an additional external temperature sensor and a fuel sensor * (depending on the model)
ETHANOL FLEX E85® Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 50% of your fuel budget on every tank fill.
Easy to install and compatible with 95% of gasoline vehicles with electronic fuel injection and oxygen sensor manufactured after 2000.
After installation vehicle will become a Flex Fuel vehicle.
Not compatible with : Direct Injection / Mechanical Injection / Carburetors
1. Made in FRANCE.
2. Covered by 2-years Limited Warranty.
3. CE approved and complies with European directives: EMC 2004/108/EC, EN61000-6-1: 2007, EN61000-6-3: 2007
5. Reduces driver's fuel budget. 50% Less on each fuel tank refill with E85. (depends of local fuel prices)
6. 100% automatic, so car can run either on Ethanol E85 or SP95/SP98 or mix of those fuels.
7. Build in cold-start assist system for easy start at cold temperatures.
8. Takes less than 45 minutes to install. There is no wires to cut or solder.
All types of connectors are available : Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
Package content:
1 x E85 Ethanol Conversion Kit.
1 x Temperature sensor.
1 x Fuel sensor.
1 x Fuel hose 50cm.
2 x Quick release connectors for hoses.
4 x Fuel hose clamps.
1 x Polarity tester.
10 x Nylon cable tie.
1 x User Manual (French / English)
Mon vieux Jaguar X-Type a retrouvé une seconde jeunesse
Le kit EcoFuelBox pro+ m'a convaincu dès les premiers jours d'utilisation sur mon vieux Jaguar X-Type de 2004 qui a retrouvé une seconde jeunesse grâce à lui. Mes frais de carburant ont chuté de plus de 50% et ma voiture fonctionne comme si elle venait de sortir d'usine. Si vous cherchez à économiser de l'argent tout en respectant l'environnement, foncez acheter ce produit. Je suis sûr que, comme moi, vous ne le regretterez pas. Merci à Alex du service client pour ses précieux conseils.
Mazda RX8 de 2011 (moteur Wankel)
Très bonne produit et très bon service client.
J'ai installé le kit ecofuelbox sur ma Mazda RX8 (moteur Wankel) fin janvier 2022, et franchement je suis très contente de mon choix. Ma voiture marche parfaitement à l'éthanol en hiver comme en été. Lors de l'installation, j'avais besoin d'aide, j'ai donc contacté le SAV et j'ai reçu des conseils très pertinents et très judicieux, bravo !!!
Contrairement à moi, mon frère a choisi de se faire instaler le kit dit "homologué" d'une autre marque (soi-disant "leader" dans l'industrie) qu'il a payé 850€ et avec avec lequel il n'a que des problèmes depuis l'installation (ratées d'allumage, demarrage difficile, surconsommation excessive de carburant...)
Par curiosité, nous avons comparé (carte électronique, câbles, connecteurs, notice d'utilisation) de son kit avec mon kit ecofuelbox.
Et bien croyez-moi son kit "homologué" (certainement fabriqué en Chine pour quelques dollars) est de si mauvaise qualité , que je pense qu'il a payé 840€ de trop.
Kit éthanol 6cyl pro+
Bonjour.
Après avoir été conseillé par Arthur,j ai acheté le kit 6cylindres pro + .
Aucun problème d installation après les conseils de votre conseiller Arthur.
Démarrage au quart de tour après l installation sur ma Mercedes ml350 luxury de 2005 et 200000kms.
Consommation de 11 a 12 litres tout a fait normal.
Merci encore pour vos conseils et pour moi le meilleur kit a se jour.
Cordialement.
Alain
Kit 6 cylindre sur un moteur ES9J4
Montage du kit 6 cylindre pro+ sur un Xantia V6 avec un moteur XFZ ES9J4.
Montage rapide en une matinée, identification des positifs 12V des injecteurs nickel RAS ^^ Boitier de qualité et SAV performant .... Merci et je recommande vivement ce boitier pour passer son véhicule à l'éthanol.
The only kit that uses AEC-Q100 components components !
My very first “Made in France” product. Delivered by DHL to the States within 48 hours as promised. I'm an electronics engineer and I have to say - great job guys! PCB looks fantastic! I have tested/used many ethanol kits and EcoFuelBox Pro is the only kit that uses AEQ-100 components and the ORIGINAL GM Flex Fuel sensor.
The firmware definitely witten with machine learning algorithms! SInce the installation, kit working like a charm with no hassle and no adjustments on my Chevy Camaro 3.6L. FYI, here in Minnesota, E85 is $3.15 per gallon.
Parfait! Matériel de qualité.
Parfait! Matériel de qualité.
Je ne suis pas trop bricoleur, donc je l'ai fais installer sur Land Rover Freelander 3.2l V6 de 2012 par mon garagiste pour 95€ de main d'oeuvre.
12800 km depuis l'installation et le kit fonctionne parfaitement sans aucun problème. Comme prévu, il y a une légère surconsommation de 10%.
J'économise presque 60% sur le carburant !!!
Produit reçu rapidement et bien emballé, qualité top, tarif intéressant.
Monté sur Dodge Charger SXT 3,6l de 2014.
Le montage est relativement simple, la notice fournie est bien détaillée et explique bien comment monter l'ensemble. Il m'a fallu environ 30 minutes pour installer le capteur de carburant et 40 minutes pour installer le kit.
Je roule au E85 pur et ça marche sacrément bien.
Maintenant, avec le kit, pour 72 litres de carburant (éthanol e85) je ne paie que 49€, alors que le plein d'essence me coûte presque 120€.
Consommation de carburant (cycle mixte) est de 12.3L/100km, soit une surconsomation de 10% par raport à l'essence.
J'économise presque 60% sur le carburant !
Artline International SARL (EcoFuelBox) is a manufacturer of E85 ethanol conversion kits, based in Lyon. We design, manufacture and distribute E85 ethanol conversion kits under brands: EcoFuelBox™ and Ethanol Flex E85™ since 2008. High quality of our products is one of the most important thing for us and our customers.
That is why, we only use premium quality automotive-specific AEC-Q100 compliant components, from the world's most reputable brands, such as: TDK, Murata, Panasonic, Infineon, Toshiba, STMicroelectronics, Bourns...
In accordance with CE regulations on automotive equipment and in accordance with the requirements of ISO 9001, each E85 bio ethanol kit (circuit board, components, firmware, wiring harness, connectors, sensors...) passes the multiple quality control stages on the different stages of production, assembly and firmware programming.
After assembly, each kits is tested and configured on a test bench to ensure that it work perfectly.
If you need technical assistance or simply want more information about the installation or use of our E85 bio ethanol kits,
the members of our Customer Service team are at your disposal.
You can reach us by phone, Monday to Friday from 9:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m., at the following numbers:
04 28 29 82 61 or 09 74 98 42 44
There are 6 types of injector connectors: Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
The type of connector may vary, depending on the make, model and manufacture date of the car.
To order a kit, all you have to do is select the right type of connectors before adding the product to the basket.
If you don't know what type of connectors is used on your car, just select "Unknown" from the connector list.
In this case, please send us a message (on the order confirmation page) specifying the following information about your vehicle:
We will check our databases for the type of connector you will need and send you the kit fitted with the right type of connectors.
IMPORTANT!
Please make sure that the parts responsible for fuel injection, ignition, cranking and managing the air / fuel mixture (spark plugs, ignition coils, filters, lambda probe, coolant temperature probe. ..) and which must be regularly replaced , were replaced within the time limits suggested by the manufacturer (according to the maintenance book).
Any of these parts, if it is faulty / degraded (which is rarely detected by the OBD2 system), can cause the malfunction of the car while running on ethanol E85 with the conversion kit.
You can reach us by phone, Monday to Friday from 9 a.m. to 12 p.m. (9h00 - 12h00) and from 1 p.m. to 5 p.m.,(17h00 - 17h00) at the following numbers:04 26 55 42 04 or my email trough our Contact Form
Ethanol Flex E85 kit could be easily installed in less than 30 minutes.
Without mechanical modification of the vehicle. There is no wires to cut or solder.
You just need to plug the kit's connectors to your vehicle wireharness and injectors, that's all.
Just follow the installation procedure described in the installation guide included in the kit. After installation, your vehicle can run on E85 bioethanol, Super 95/98 or a mixture of these fuels.
The kit can be removed without leaving any trace.