PRO Series Fully Automatic Digital 6-Cylinders E85 Ethanol Conversion Kit with temperature sensor & Cold Start Assist. (Flex Fuel, Bioethanol)
EcoFuelBo ® PRO Series Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 40% of your fuel budget on every tank fill.
Made in France. CE, RoHs.
Warning: Last items in stock!
PRO Series 6 cylinders - Fully Automatic Digital E85 Ethanol Conversion Kit with Cold Start Assist. (Flex Fuel kit, Kit e85, Bioethanol)
This new model is equipped with a more powerful microcontroller, an additional external temperature sensor and cold start assist.
ETHANOL FLEX E85® Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 40% of your fuel budget on every tank fill.
Easy to install and compatible with 95% of gasoline vehicles with electronic fuel injection and oxygen sensor manufactured after 1990.
After installation vehicle will become a Flex Fuel vehicle.
Not compatible with : Direct Injection / Mechanical Injection / Carburetors)
1. Made in FRANCE.
2. Covered by 2-years Limited Warranty.
3. CE approved and complies with European directives: EMC 2004/108/EC, EN61000-6-1: 2007, EN61000-6-3: 2007
5. Reduces driver's fuel budget. 40% Less on each fuel tank refill with E85. (depends of local fuel prices)
6. 100% automatic, so car can run either on Ethanol E85 or SP95/SP98 or mix of those fuels.
7. Build in cold-start assist system for easy start at cold temperatures.
8. Takes less than 25 minutes to install. There is no wires to cut or solder.
9. No mechanical skills or special tools are required.
10. No mechanical modification of vehicle is required.
All types of connectors are available : Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
1 x Ethanol Flex ethanol conversion kit.
1 x Temperature sensor.
1 x Polarity tester.
10 x Nylon cable quick fastener.
1 x User Manual (French / English)
Artline International SARL (EcoFuelBox) is a manufacturer of E85 ethanol conversion kits, based in Lyon.
We design, manufacture and distribute E85 ethanol conversion kits under brands: EcoFuelBox™ and Ethanol Flex E85™ since 2008. High quality of our products is one of the most important thing for us and our customers.
That is why, we only use premium quality automotive-specific AEC-Q100 compliant components, from the world's most reputable brands, such as: TDK, Murata, Panasonic, Infineon, Toshiba, STMicroelectronics, Bourns...
In accordance with CE regulations on automotive equipment and in accordance with the requirements of ISO 9001, each E85 bio ethanol kit (circuit board, components, firmware, wiring harness, connectors, sensors...) passes the multiple quality control stages on the different stages of production, assembly and firmware programming.
After assembly, each kits is tested and configured on a test bench to ensure that it work perfectly.
If you need technical assistance or simply want more information about the installation or use of our E85 bio ethanol kits,
the members of our Customer Service team are at your disposal.
You can reach us by phone, Monday to Friday from 9:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m., at the following numbers:
04 28 29 82 61 or 09 74 98 42 44
Ethanol Flex E85 kit could be easily installed in less than 30 minutes.
Without mechanical modification of the vehicle. There is no wires to cut or solder.
You just need to plug the kit's connectors to your vehicle wireharness and injectors, that's all.
Just follow the installation procedure described in the installation guide included in the kit. After installation, your vehicle can run on E85 bioethanol, Super 95/98 or a mixture of these fuels.
The kit can be removed without leaving any trace.
There are 6 types of injector connectors: Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
The type of connector may vary, depending on the make, model and manufacture date of the car.
To order a kit, all you have to do is select the right type of connectors before adding the product to the basket.
If you don't know what type of connectors is used on your car, just select "Unknown" from the connector list.
In this case, please send us a message (on the order confirmation page) specifying the following information about your vehicle:
We will check our databases for the type of connector you will need and send you the kit fitted with the right type of connectors.
Please make sure that the parts responsible for fuel injection, ignition, cranking and managing the air / fuel mixture (spark plugs, ignition coils, filters, lambda probe, coolant temperature probe. ..) and which must be regularly replaced , were replaced within the time limits suggested by the manufacturer (according to the maintenance book).
Any of these parts, if it is faulty / degraded (which is rarely detected by the OBD2 system), can cause the malfunction of the car while running on ethanol E85 with the conversion kit.
You can reach us by phone, Monday to Friday from 9 a.m. to 12 p.m. (9h00 - 12h00) and from 1 p.m. to 5 p.m.,(17h00 - 17h00) at the following numbers:04 28 29 82 61 or 09 74 98 42 44 Or my email trough our Contact Form