PRO+ Series Fully Automatic Digital 4-Cylinders E85 Ethanol Conversion Kit with Fuel Sensor & Cold Start Assist. (Flex Fuel, Bioethanol)
ETHANOL FLEX E85® Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 50% of your fuel budget on every tank fill.
Made in France. CE, RoHs.
Warning: Last items in stock!
PRO+ Series 4 cylinders - Fully Automatic Digital E85 Ethanol Conversion Kit with Cold Start Assist. (Flex Fuel kit, Kit e85, Bioethanol)
This new model is equipped with a more powerful microcontroller, an additional external temperature sensor and a fuel sensor * (depending on the model)
EcoFuelBox E85® Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 50% of your fuel budget on every tank fill.
Easy to install and compatible with 95% of gasoline vehicles with electronic fuel injection and oxygen sensor manufactured after 2000.
After installation vehicle will become a Flex Fuel vehicle.
Not compatible with : Direct Injection / Mechanical Injection / Carburetors)
1. Made in FRANCE.
2. Covered by 2-years Limited Warranty.
3. CE approved and complies with European directives: EMC 2004/108/EC, EN61000-6-1: 2007, EN61000-6-3: 2007
5. Reduces driver's fuel budget. 50% savings on each fuel tank refill with E85. (depends of local fuel prices)
6. 100% automatic, so car can run either on Ethanol E85 or SP95/SP98 or mix of those fuels.
7. Build in cold-start assist system for easy start at cold temperatures.
8. Takes less than 45 minutes to install. There is no wires to cut or solder.
All types of connectors are available : Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
1 x E85 Ethanol Conversion Kit.
1 x Temperature sensor.
1 x Fuel sensor.
1 x Reinforced fuel hose SAE J30R (special ethanol) 50cm.
2 x Quick release connectors for hoses.
4 x Fuel hose clamps.
1 x Polarity tester.
10 x Nylon cable tie.
1 x User Manual (French / English)
Artline International SARL (EcoFuelBox) is a manufacturer of E85 ethanol conversion kits, based in Lyon.
We design, manufacture and distribute E85 ethanol conversion kits under brands: EcoFuelBox™ and Ethanol Flex E85™ since 2008. High quality of our products is one of the most important thing for us and our customers.
That is why, we only use premium quality automotive-specific AEC-Q100 compliant components, from the world's most reputable brands, such as: TDK, Murata, Panasonic, Infineon, Toshiba, STMicroelectronics, Bourns...
In accordance with CE regulations on automotive equipment and in accordance with the requirements of ISO 9001, each E85 bio ethanol kit (circuit board, components, firmware, wiring harness, connectors, sensors...) passes the multiple quality control stages on the different stages of production, assembly and firmware programming.
After assembly, each kits is tested and configured on a test bench to ensure that it work perfectly.
If you need technical assistance or simply want more information about the installation or use of our E85 bio ethanol kits,
the members of our Customer Service team are at your disposal.
You can reach us by phone, Monday to Friday from 9:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m., at the following numbers:
04 28 29 82 61 or 09 74 98 42 44
As you can see from the installation diagram below, a simple connection of the kit to the ECU injection harness connectors and your vehicle's fuel injectors is enough to install the EcoFuelBox E85 PRO+ series bioethanol kit. Just follow the installation procedure described and illustrated in the user guide supplied with the kit.
On most vehicles, installation of the kit only takes 30 minutes and does not require any mechanical modifications. PRO+ kits are supplied with a fuel sensor, a reinforced high quality SAE J30R (special ethanol) fuel hose, quick connectors and fuel hose clamps. Additional 20-30 minutes are required for fuel sensor installation. You can cut the fuel hose supplied with the kit to the required length without having to cut the car's original fuel hose.
Our kits are supplied with high quality connectors, identical to those used by car manufacturers,
so you don't need to cut or solder wires during installation. It is a Plug-and-Drive installation.
There are 6 types of injector connectors: Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
The type of connector may vary, depending on the make, model and manufacture date of the car.
To order a kit, all you have to do is select the right type of connectors before adding the product to the basket.
If you don't know what type of connectors is used on your car, just select "Unknown" from the connector list.
In this case, please send us a message (on the order confirmation page) specifying the following information about your vehicle:
We will check our databases for the type of connector you will need and send you the kit fitted with the right type of connectors.
Please make sure that the parts responsible for fuel injection, ignition, cranking and managing the air / fuel mixture (spark plugs, ignition coils, filters, lambda probe, coolant temperature probe. ..) and which must be regularly replaced , were replaced within the time limits suggested by the manufacturer (according to the maintenance book).
Any of these parts, if it is faulty / degraded (which is rarely detected by the OBD2 system), can cause the malfunction of the car while running on ethanol E85 with the conversion kit.
PRO+ Series Fully Automatic Digital 3-Cylinders E85 Ethanol Conversion Kit...
PRO+ Series Fully Automatic Digital 8-Cylinders E85 Ethanol Conversion Kit...
PRO Series Fully Automatic Digital 4-Cylinders E85 Ethanol Conversion Kit...