loading spinner

PRO+ Series 3 Cyl-Ethanol E85 Kits

New product

PRO+ Series Fully Automatic Digital 3-Cylinders E85 Ethanol Conversion Kit with Fuel Sensor & Cold Start Assist. (Flex Fuel, Bioethanol)
ETHANOL FLEX E85®  Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 40% of your fuel budget on every tank fill.

Made in France. CE, RoHs.

More details

358,24€

PRO+ Series 3 cylinders - Fully Automatic Digital E85 Ethanol Conversion Kit with Cold Start Assist. (Flex Fuel kit, Kit e85, Bioethanol)

This new model is equipped with a more powerful microcontroller, an additional external temperature sensor and a fuel sensor * (depending on the model)

ETHANOL FLEX E85®  Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 40% of your fuel budget on every tank fill.
Easy to install and compatible with 95% of gasoline vehicles  with electronic fuel injection and oxygen sensor manufactured after 1990.

After installation vehicle will become a Flex Fuel vehicle.

Not compatible with :  Direct Injection / Mechanical Injection / Carburetors)

1. Made in FRANCE.
2. Covered by 2-years Limited Warranty.
3. CE approved and complies with European directives: EMC 2004/108/EC, EN61000-6-1: 2007, EN61000-6-3: 2007
5. Reduces driver's fuel budget. 40% Less on each fuel tank refill with E85. (depends of local fuel prices)
6. 100% automatic, so car can run either on Ethanol E85 or SP95/SP98 or mix of those fuels.
7. Build in cold-start assist system for easy start at cold temperatures.
8. Takes less than 45 minutes to install. There is no wires to cut or solder.
 
All types of connectors are available : Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.

Package content:

1 x E85 Ethanol Conversion Kit.
1 x Temperature sensor.
1 x Fuel sensor.
1 x Fuel hose 50cm.
2 x Quick release connectors for hoses.
4 x Fuel hose clamps.
1 x Polarity tester.
10 x Nylon cable tie.
1 x User Manual (French / English)

Grade 
2021-01-15

Faire le plein à 0,65€ le litre est un régal!

J'ai installé un kit sur ma Dacia Sandero 0.9l 3-cylindres avec les connecteurs Denso.
Le manuel est très explicite rien à redire de se côté là. Montage très facile, presque Plug & Play, il suffit de vérifier la polarité des connecteurs du faisceau d'injecteurs avec le testeur LED inclus.
Aucun problème de démarrage par temps froid. Ma voiture démarre au quart de tour.
Faire le plein à 0,65€ le litre est un régal!

  • 1 out of 1 people found this review useful.

Write your review!

Write a review

PRO+ Series 3 Cyl-Ethanol E85 Kits

PRO+ Series 3 Cyl-Ethanol E85 Kits

PRO+ Series Fully Automatic Digital 3-Cylinders E85 Ethanol Conversion Kit with Fuel Sensor & Cold Start Assist. (Flex Fuel, Bioethanol)
ETHANOL FLEX E85®  Ethanol Conversion Kit allows to run any gasoline vehicle either on Ethanol E85 (also known as Bioethanol) or unleaded petrol 95/98, and save up to 40% of your fuel budget on every tank fill.

Made in France. CE, RoHs.

Société Artline International SARL (EcoFuelBox) est un fabricant des boitiers éthanol, basée à Lyon. stesting_SMALL.jpg
Nous concevons, fabriquons et distribuons des kits de conversion à l'éthanol sous marques: EcoFuelBox™ et Ethanol Flex E85™ depuis 2008La qualité de nos produits est la choses la plus importantes pour nous et nos clients.

C'est pourquoi, nous n'utilisons que des composants de qualité supérieure conformes à la norme AEC-Q200, spécifiques à l'industrie automobile, et uniquement des marques les plus réputées au monde, telles que : TDK, Murata, Panasonic, Infineon, Toshiba, STMicroelectronics, Bourns...

Conformément à la réglementation CE sur les équipements automobiles et conformément aux exigences de l'ISO 9001, chaque kit éthanol E85 (circuit imprimé, chaque faisceau électrique, capteurs...) passe les multiples étapes de contrôle qualité sur les différentes stades de production, assemblage et programmation du firmware.

Après l'assemblage, tous nos kits sont testés et paramétrés sur un banc d'essai afin de s'assurer de leur parfait fonctionnement.

Si toutefois vous avez besoin d'une assistance technique ou souhaitez simplement d'avoir plus d'information au sujet de l'installation ou de l'utilisation de  nos kits éthanol E85, les membres de notre équipe de Service Client sont à votre disposition.
Vous pouvez nous joindre par téléphone, du lundi au vendredi de 09h00 à 12h00 et de 13h0 à 17h00, aux numéros suivants:
04 28 29 82 61 ou 09 74 98 42 44

Ethanol Flex E85 kit could be easily installed in less than 30 minutes.
Without mechanical modification of the vehicle. There is no wires to cut or solder.
You just need to plug the kit's connectors to your vehicle wireharness and injectors, that's all.

Just follow the installation procedure described in the installation guide included in the kit. After installation, your vehicle can run on E85 bioethanol, Super 95/98 or a mixture of these fuels.
The kit can be removed without leaving any trace.


 
 

 
  
         

COMMENT FAIRE POUR PASSER UNE COMMANDE ?

There are 6 types of injector connectors: Bosch EV1, Bosch EV6, Delphi, Denso, Honda, Toyota.
The type of connector may vary, depending on the make, model and  manufacture date of the car.

To order a kit, all you have to do is select the right type of connectors before adding the product to the basket.

If you don't know what type of connectors is used on your car, just select "Unknown" from the connector list.
In this case, please send us a message (on the order confirmation page) specifying the following information about your vehicle:

  • Make and model of your (e.g .: PEUGEOT 406 2.0L)
  • The date of first registration (ex .: 20/09/2003)
  • VIN Number (ex .: WBAWD71017P073673)
  • The odometer reading (e.g .: 98,500 km)

We will check our databases for the type of connector you will need and send you the kit fitted with the right type of connectors.

This information is important for processing your order as quickly as possible.

IMPORTANT!
Please make sure that the parts responsible for fuel injection, ignition, cranking and managing the air / fuel mixture (spark plugs, ignition coils, filters, lambda probe, coolant temperature probe. ..) and which must be regularly replaced , were replaced within the time limits suggested by the manufacturer (according to the maintenance book).
Any of these parts, if it is faulty / degraded (which is rarely detected by the OBD2 system), can cause the malfunction of the car while running on ethanol E85 with the conversion kit.

You can reach us by phone, Monday to Friday from 9 a.m. to 12 p.m. (9h00 - 12h00) and from 1 p.m. to 5 p.m.,(17h00 - 17h00) at the following numbers:

04 28 29 82 61 or 09 74 98 42 44   Or my email trough our Contact Form